Below is a tutorial explaining how to install CM10.1 M3 Android 4.2.2 Jelly Bean on the Samsung Galaxy S3 with the model number SGH-T999. But before trying out the process, users are advised to take note of the following aspects:
- Back up your data
- The device must have at least 80 percent battery power
- The USB Driver must be installed for the Samsung Galaxy S3 in your PC
- Enable USB Debugging via Setting > Developer options > USB Debugging
- Ensure your device is rooted and has ClockWorkMod Recovery installed
- In case you get stuck on boot or experience boot loop, perform wipe cache partition and wipe dalvik cache a few more times before rebooting
Users must remember that this tutorial is meant only for the Samsung Galaxy S3 (SGH-T999). It should not be tried on any other Android device.
Note: IBTimes cannot be held responsible if anything goes wrong. Users should proceed at their own risk.
Installation Tutorial
Step 1: Download the CM10.1 M3 Android 4.2.2 Jelly Bean custom ROM.
Step 2: Download Google Apps.
Step 3: Connect the Samsung Galaxy S3 to PC via USB.
Step 4: Copy all downloaded zip files to the SD card of your phone. But do not extract any files.
Step 5: Disconnect USB and turn off your phone.
Step 6: Boot into ClockWorkMod recovery in your Galaxy S3 by pressing and holding the Volume Up, Home and Power buttons at the same time till you see the Samsung logo on the screen.
Step 7: Release all three buttons for half a second and hold them again. You will get the ClockWorkMod recovery screen. Use the Volume keys to browse between options in recovery while using the Power key to select an option.
Step 8: Now perform the data wiping task. To do so, select “wipe data/ factory reset,” then select Yes on next screen to confirm your action. After that, perform a cache wipe by selecting “wipe cache partition.”
Step 9: Select “install zip from sdcard,” then select “choose zip from sdcard.” After that, locate the CM 10.1 zip file and select it by pressing the Power button.
Step 10: Confirm the installation by selecting Yes – Install _____.zip on the next screen. The ROM installation will begin.
Step 12: After the installation process ends, repeat Step 9 but with Google Apps zip file to install the apps package.
Step 13: Once the installation process is completed, go back to the main recovery menu and select “reboot system now.”
The device will reboot and boot up into the customized CM10.1 M3 Android 4.2.2 Jelly Bean ROM. The first boot will take time.
If you have any Problem Please ask in Comment.
Written by fdfffs
We Keep Blogging As Our Hobby And Try To Keep Our Readers Updated With The Latest Know-Hows Of The Technology World.. Keep Reading..
0 comments:
Post a Comment
Thankxxx